Call for price
Seller Information
View Seller Information
General
Manufacturer
CATERPILLAR
Model
14M
Hours
9,700
Serial Number
SERIAL NUMBER
Condition
Used
Stock Number
196879
Description
Caterpillar 14M Motor Grader
Engine:
Make Caterpillar.
Model C11 ACERT VHP.
Net Power Gear 1-2 259 hp/193 kw.
Net Power Gear 3-4 274 hp/204 kw.
Power Measured @: 1800 rpm.
Net Power Gear 5-6: 274 hp/204 kw.
Number of Cylinders: 6.
Net Power Gears 7-8: 274 hp/204.3 kw.
Max Power: 274 hp/204.3 kw.
Displacement: 677 cu in/11.1 L.
Operational:
Front Axle Std Operation Weight: 12611 lb/5720 kg.
Rear Axle Std Operation Weight: 34522 lb/15659 kg.
Total Std Operation Weight: 47133 lb/21379 kg.
Front Axle Max Operation Weight: 21912 lb/9939 kg.
Rear Axle Max Operation Weight: 44086 lb/19997 kg.
Total Max Operation Weight: 65998 lb 29936 kg.
Fuel Capacity: 130 gal/492 L.
Cooling System Fluid Capacity: 12.3 gal/46.5 L.
Hydrauilc System Fluid Capacity: 15.9 gal/60 L.
Transmission Fluid Capacity: 23.5 gal/89 L.
Circle Gearbox Fluid Capacity: 1.6 gal/6 L.
Tandem Case Fluid Capacity (each): 25.5 gal/96.5 L.
Transmission:
Type: direct drive, power shift, countershaft.
Number of Forward Gears: 8.
Number of Reverse Gears: 6.
Max Forward Speed: 31 mph/49.8 km/h.
Max Reverse Speed: 24.5 mph/39.4 km/h.
Steering:
Articulation L/R: 20 degrees.
Turning Radius: 25.9 ft in/7.9 m.
Front Axle:
Wheel Lean: 17.1 degrees.
Oscillation: Total 32 degrees.
Hydraulic System:
Pump Type: variable displacement.
Pump Flow: 74 gal/min;280 L/min.
Relief Valve Pressure: 3500 psi/24150 kPa.
Moldboard:
Moldboard Width: 14 ft in/4267 mm.
Moldboard Height: 27 in/688 mm.
Moldboard Thickness: 1 in/25 mm.
Max Depth of Cut: 17.3 in/438 mm.
Left Side Shift: 29.1 in/740 mm.
Right Side Shift: 31.1 in/790 mm.
Blade Pull at Max Weight: 39678 lb/17997 kg.
Blade Down Pressure: 38666.9 lb/17539 kg.
Circle:
Diameter: 71.8 in/1822 mm.
Shift Left: 25.5 in/650 mm.
Shift Right: 20.5 in/520 mm.
Max Reach Outside Tires: Left 85.4 in/2169 mm.
Max Reach Outside Tires: Right 89.7 in/2279 mm.
Max Lift Above Ground: 16.5 in/419 mm.
Front Blade Tip Angle: 40 degrees.
Reart Blade Tip Angle: 5 degrees.
Dimensions:
Height to Top of Cab: 11.6 ft in/3535 mm.
Overall Length: 30.9 ft in/9412 mm.
Width Over Tires: 9.2 ft in/2791 mm.
Wheelbase: 21.5 ft in/6559 mm.
Blade Base: 9.3 ft in/2842 mm.
Tandem Axle Wheelbase: 5.4 ft in/1656 mm.
Rear Ground Clearance: 1.3 ft in/383 mm.
7 shank ripper blade.
4 shanks fitted.
Full ROPS cab.
Hours: 9700.
Exterior
ROPS
Enclosed